Cart ()

Foxtail Pine

Pinus balfouriana

Height: 30' average mature height
Hardiness Zones: 5-8 Find my zone
Aspect: afternoon shade to full sun

This plant can't be shipped to California, Hawaii, Montana
Size Availability

Out of season.
Our main crop of most plants is available starting in late fall. Additional batches of plugs and quarts are usually added in May.

Many of our plants are propagated in limited quantities and can sell out quickly when posted, get on the notification list below so you don't miss out.
Add your email to be notified as soon as we have them back in stock:
This does NOT subscribe your email to any mailing lists, our system will only send an inventory notification message.
The Foxtail Pine is a five needle tree that can only be found in two separated populations in California, one in the Klamath Mountains and one in the Sierra Mountains. Foxtail Pines very closely resemble the Great Basin Bristlecone Pine, both of which grow at extremely high elevations in harsh environments. The most interesting feature that differentiates Foxtail Pines from all other Pines is that the branches tend to grow long and straight without forking, causing a single "tail" to be up to three feet long without a single side branchlet. As this form continues as the trees mature, Foxtail Pines will typically develop into a thick tapered trunk with few true branches and only dense tufts of "tail" like branches.

The Foxtail Pine is closely related to the Bristlecone Pines (such as the Rocky Mountain and Great Basin Pines) and the Foxtail Pine's name is used for the subsection Balfourianae  to describe all of the true Bristlecone Pines. Because the Bristlecone Pines are native to extreme elevations in poor, rocky soils they can be difficult to grow in landscapes but are very popular with Bonsai growers. Foxtail and other Bristlecone Pines require well drained soil and perform poorly in clay, however in their native soils they develop deep taproots which allow them to access moisture throughout the summer. This condition can be difficult to mimic in the landscape where soils are shallower so we have found that all Bristlecone Pines perform best when grown in soil amended with perlite and watered deeply every other week. When growing in containers we use pure shredded pine or fir bark as the potting medium and water each morning, the bark allows the water to drain quickly while still holding enough for the roots. Fertilize with a complete nutrient source like Osmocote Plus since there are very few minerals available in bark.

Although Foxtail and Bristlecone Pines grow in very hot climates, they will typically experience extremely cold nights even during the peak of summer and so are not very tolerant of low elevations with warm nights. In high heat locations your best bet for growing these high elevation conifers is to provide afternoon shade and protection from wind, while still allowing for full sun for the first half of the day.

Bristlecone Pines
There are three true Bristlecone Pine species, the Great Basin Bristlecone, Rocky Mountain Bristlecone, and Foxtail pines as well as two other more distantly related species: Whitebark and Limber Pines. All five of these species are typically found at extreme elevations where they are tough, long-lived trees that grow slowly into impressive gnarled specimens in locations where no other trees can survive. These trees can survive for thousands of years under harsh mountaintop conditions and all five species have at least one individual that is estimated to be over 3,000 years old. However, despite their longevity under such harsh conditions, these types of trees can be difficult to grow in lowland conditions where high heat and humidity, as well as nutrient-rich and moist soils, are unfamiliar and unwelcome. 

The only species that seems easy to grow in landscapes is the  Limber Pine  as it seems to be much more adaptive to heat and soils that aren't made entirely of deep gravel and boulders. When growing the other species in containers (such as for bonsai), we recommend growing them in a mixture that is primarily made up of volcanic pumice or perlite. This material is free draining but holds onto more moisture than pure gravel. However, the trees will still need to be watered somewhat frequently to prevent the roots from drying out entirely since these trees are used to having their roots 30-100 feet deep.


A young Foxtail Pine showing its long branches
Source: Commons

Foxtail Pines growing along a mountain lake
Source: Commons

Foxtail Pine cones
Source: Commons

Foxtail Pine cones
Source: Commons

Foxtail Pine grove of mature trees
Source: Commons

Foxtail Pine showing the short branches coming directly out of the main trunk
Source: Commons

Packing Plants For Shipping

Most of our plants are shipped bare root while they are dormant from late November through April and ship via the U.S. Postal Service. Bamboo plants can be shipped in their containers year-round by UPS.

Bare root plants are soaked and wrapped together in bundles.
ictured are 10x 24 inch tall Coast Redwoods.

The bundled plants are wrapped in paper and labeled by variety.

The bundle is wetted and bagged.

Bundles of plants are secured in long boxes.

Pruning and Plant Sizes

We prune both the tops and the roots of our plants at least once per year while they are growing in our nursery to ensure they develop a strong, dense form. Regular annual pruning goes a long way to ensure a healthy branching structure and this is often a missed step in many nurseries. Pruning a plant back hard after it has been neglected pruning-wise often results in an irregular branch habit or multiple leaders so we prune early and regularly instead. We also prune the roots of our plants while they are dormant which causes them to produce a much more branched structure and helps to elimate tangled masses that hinder future development. Plants that have been root pruned establish themselves much more quickly than root bound plants. Generally, hardwood plants will be pruned in the winter and conifers will be pruned in the summer.

Before shipping plants we prune the tops and roots one last time. Conifers will usually have very little pruning except to balance out long branches. Shrubs are usually pruned to around 1-2 feet tall to encourage low branch development and small to medium sized trees are usually pruned to around 36-40 inches. Pruning trees at this height encourages dominant branches to begin forming around 3 feet from the ground which typically looks the best in most situations. However, if you want a tree to have branching start higher (some city codes require trees to not branch below 4 feet) we have longer boxes available. To request taller trees please contact us at least three days before your ship date. Depending on your location and the shipping routes there may be a fee for oversize package handling (usually about $15 for a 60 inch box).

Tall trees (Oaks, Ginkgo, large Maples, etc.) are pruned to 40 inches to encourage crown development from about 36 inches and up

Small and medium trees (short Maples, Redbuds, Stewartia, etc.) are pruned 10-20 inches above the prune line from last year

Shrubs (Weigela, Hydrangea, Viburnum, etc.) are pruned to 18 inches tall and root pruned one last time

Small plug size

Bamboo Plants Are Shipped In Their Containers

Bamboo roots are not flexible and so plants have to be shipped in their containers. These plants are heavier and are shipped separately from bare root plants. Because they are potted they can handle longer transit times so can ship via UPS Ground instead of USPS Air Mail. Potted plants can also be shipped year-round.

We regularly top our 1 gallon bamboo plants at 24-30 inches tall throughout the growing season. This results in dense, bushy foliage while allowing for economical shipping. From this size most running species will grow to 5-6 feet tall in the first spring and clumping species will usually grow to 4-5 feet tall.

1 gallon bamboo plants strapped in and ready to be sealed.

Unpacking Bare Root Plants

You will be sent tracking details as soon as your plants are shipped. Unpack your plants as quickly as possible after they are delivered. We use two types of boxes, side-sealing and top-sealing. For boxes that are taped along the whole length you can cut the tape on either side and remove the plant bundles by cutting the tape holding the bundle to the bottom. For boxes that are sealed on the top and bottom, it is easiet to open the bottom of the box (the shipping label is at the top) and pull the bundle of plants out straight out. Check that the box is empty as there can be a second bundle of plants stuck towards the top.


A bundle of trees.
When you are ready to plant, remove the trees from the plastic and soak the roots in a bucket of water for 30 seconds. Do not expose the roots to direct sunlight and do not allow them to dry out. When planting large quantities of plants we keep the plants in a black garbage bag to keep all sun and air flow away from the roots and pull each plant as soon as the planting hole is ready. Water the soil well right after planting.

What if I am not able to plant right away?

You can usually leave the plants in their shipping container unopened for 1-2 days if there were no shipping delays and you have received your plants from late November through February. Plants shipped when it is warmer can't stay in their packages for as long.
Size Availability
Out of season.
Our main crop of most plants is available starting in late fall. Additional batches of plugs and quarts are usually added in May.

Many of our plants are propagated in limited quantities and can sell out quickly when posted, get on the notification list below so you don't miss out.
Add your email to be notified as soon as we have them back in stock:
This does NOT subscribe your email to any mailing lists, our system will only send an inventory notification message.
Red Panda Nursery       Medford, Oregon       info@redpandanursery.com       Privacy Policy
By using this site you agree to our Terms and Conditions
.